Back to: DYNO PROVEN TOP END KITS - HOLDEN V8

TOP END KIT- HOLDEN V8 Street Solid Roller Cam/ Cast Iron PFI VN Heads/ Single Plane Intake (535 HP)

PDFPrint
top-end-kits-clev-web-large-with-pavtel-logo
Price:
Price: $ 8550.00
Description

 

Pavtek DIY Top End Kit Part # TEK355H302
   
GENERAL TECH. INFO  
Dyno Results Based On - Cubic Inches
355
Ft/lbs @ RPM
455 / 5100
Horsepower @ RPM
535 / 6750
Fuel Used For Dyno Results
PULP 98 Octane
Compression Ratio Used For Dyno Results
11.01:1
Carburettor Used For Dyno Results
Holley 750 Street HP
Pipes Used For Dyno Results 1.750" TRI-Y (Pacemaker)
Recommended Minimum Bore Size
4.000"
Recommended Minimum Converter RPM
4250
Recommended Best Converter RPM
5000
Recommended Max RPM Shift
7000
Kit Can be Used for Cubic Inches Between
304 TO 383
   
CYLINDER HEADS  
Final Cylinder Head Chamber Volume - CC's
59
Cylinder Head Casting
OEM VN PFI
Cylinder Head Material
Cast Iron
Cylinder Head Porting Included
Yes
Cylinder Head Porting Style - Intake
Full 5 Axis CNC
Cylinder Head Porting Style - Exhaust Full 5 Axis CNC
Cylinder Head Porting Style - Chambers No
Valve Seats Fitted to Intake No
Valve Seats Fitted To Exhaust No
Valve Material Stainless Steel
Valve Size - Intake 2.020"
Valve Size - Exhaust 1.625"
Retainer Material - Style Chrome Moly / 10 Degree
Valve Stem Seals - Style Teflon- Crane
Valve Spring Style Included Dual With Dampner -Isky
Valve Spring Locaters Included No
   
CAM AND LIFTERS  
Cam Type / Brand Included Street Solid Roller Custom / Pavtek
Lifter Type / Brand Included Solid Roller Vertical Tie Bar - Comp Cams .842"
   
INTAKE MANIFOLD  

Intake Manifold Included

Yes

Intake Manifold - Brand

Torque Power

Intake Manifold - Style

Single Plane
Intake Manifold - Part# TP-002
Intake Manifold Porting Yes
Intake Port Matched to Suit / Deck Height 8.865"
Intake Manifold Gaskets Included Yes
Intake Manifold Gasket - Part# PPI-308VN
Intake Manifold Bolts Included Yes
Intake Manifold Bolts - Part# Capscrews - Black
   
ROCKERS / PUSHRODS AND GUIDE PLATES  
Roller Rockers Included Yes
Roller Rockers - Part# Yella Terra Shaft 1.65RR # YT-6030
Rocker Studs Included Not Required With Shaft Rockers
Rocker Studs - Part# Not Required With Shaft Rockers
Guide Plates Included Not Required With Shaft Rockers
Guide Plates Style Not Required With Shaft Rockers
Guide Plates - Part# Not Required With Shaft Rockers
Pushrods Included Yes
Pushrods - Brand Trend
Pushrods Style / Material .080" Wall / 5/16 / 210 Radius / Chrome Moly
   
HEAD BOLTS AND HEAD GASKETS  
Head Bolts / Head Studs Included Not Included
Head Bolts / Head Studs Part# Not Included
Head Gaskets Included Not Included
Head Gaskets - Part# Not Included
   
CARBURETTOR SPACER  
Carby Spacer Included No
Carby Spacer - Style PT-24HP Was used for these results

 

TORQUE POWER INTAKE IS SUPPLIED AND PORTED FOR PORT MATCH. PLEASE NOTE THERE IS

A MASSIVE AMOUNT OF MATERIAL THAT NEEDS TO BE REMOVED FROM THIS INTAKE.

A HARROP INTAKE CAN BE USED, BUT WE HAVE FOUND LOW END TORQUE IS NOT AS GOOD

AS THE TORQUE POWER.

 

 

 

Price Is Subject To Change - If Ordered Online We Will Contact You And Offer A Full Refund If :

"IF" We can't match the price listed on our online store due to the fluctuating AUD

"IF" We can not ship within 10 business days

 

SHIPPING OF COMPLETE STROKER OR TOP END KITS

 

 "If Ordered Online" $55 Fixed Charge Available Australia Wide At Checkout

 

Actual item may differ from image shown