TOP END KIT- HOLDEN V8 Street Solid Roller Cam/ Cast Iron PFI VN Heads/ Single Plane Intake (535 HP)
Price:
Variant price modifier:
Price: $ 8550.00
You save:
Price / kg:
Description
| Pavtek DIY Top End Kit Part # | TEK355H302 |
| GENERAL TECH. INFO | |
| Dyno Results Based On - Cubic Inches |
355 |
| Ft/lbs @ RPM |
455 / 5100 |
| Horsepower @ RPM |
535 / 6750 |
| Fuel Used For Dyno Results |
PULP 98 Octane |
| Compression Ratio Used For Dyno Results |
11.01:1 |
| Carburettor Used For Dyno Results |
Holley 750 Street HP |
| Pipes Used For Dyno Results | 1.750" TRI-Y (Pacemaker) |
| Recommended Minimum Bore Size |
4.000" |
| Recommended Minimum Converter RPM |
4250 |
| Recommended Best Converter RPM |
5000 |
| Recommended Max RPM Shift |
7000 |
| Kit Can be Used for Cubic Inches Between |
304 TO 383 |
| CYLINDER HEADS | |
| Final Cylinder Head Chamber Volume - CC's |
59 |
| Cylinder Head Casting |
OEM VN PFI |
| Cylinder Head Material |
Cast Iron |
| Cylinder Head Porting Included |
Yes |
| Cylinder Head Porting Style - Intake |
Full 5 Axis CNC |
| Cylinder Head Porting Style - Exhaust | Full 5 Axis CNC |
| Cylinder Head Porting Style - Chambers | No |
| Valve Seats Fitted to Intake | No |
| Valve Seats Fitted To Exhaust | No |
| Valve Material | Stainless Steel |
| Valve Size - Intake | 2.020" |
| Valve Size - Exhaust | 1.625" |
| Retainer Material - Style | Chrome Moly / 10 Degree |
| Valve Stem Seals - Style | Teflon- Crane |
| Valve Spring Style Included | Dual With Dampner -Isky |
| Valve Spring Locaters Included | No |
| CAM AND LIFTERS | |
| Cam Type / Brand Included | Street Solid Roller Custom / Pavtek |
| Lifter Type / Brand Included | Solid Roller Vertical Tie Bar - Comp Cams .842" |
| INTAKE MANIFOLD | |
|
Intake Manifold Included |
Yes |
|
Intake Manifold - Brand |
Torque Power |
|
Intake Manifold - Style |
Single Plane |
| Intake Manifold - Part# | TP-002 |
| Intake Manifold Porting | Yes |
| Intake Port Matched to Suit / Deck Height | 8.865" |
| Intake Manifold Gaskets Included | Yes |
| Intake Manifold Gasket - Part# | PPI-308VN |
| Intake Manifold Bolts Included | Yes |
| Intake Manifold Bolts - Part# | Capscrews - Black |
| ROCKERS / PUSHRODS AND GUIDE PLATES | |
| Roller Rockers Included | Yes |
| Roller Rockers - Part# | Yella Terra Shaft 1.65RR # YT-6030 |
| Rocker Studs Included | Not Required With Shaft Rockers |
| Rocker Studs - Part# | Not Required With Shaft Rockers |
| Guide Plates Included | Not Required With Shaft Rockers |
| Guide Plates Style | Not Required With Shaft Rockers |
| Guide Plates - Part# | Not Required With Shaft Rockers |
| Pushrods Included | Yes |
| Pushrods - Brand | Trend |
| Pushrods Style / Material | .080" Wall / 5/16 / 210 Radius / Chrome Moly |
| HEAD BOLTS AND HEAD GASKETS | |
| Head Bolts / Head Studs Included | Not Included |
| Head Bolts / Head Studs Part# | Not Included |
| Head Gaskets Included | Not Included |
| Head Gaskets - Part# | Not Included |
| CARBURETTOR SPACER | |
| Carby Spacer Included | No |
| Carby Spacer - Style | PT-24HP Was used for these results |
TORQUE POWER INTAKE IS SUPPLIED AND PORTED FOR PORT MATCH. PLEASE NOTE THERE IS
A MASSIVE AMOUNT OF MATERIAL THAT NEEDS TO BE REMOVED FROM THIS INTAKE.
A HARROP INTAKE CAN BE USED, BUT WE HAVE FOUND LOW END TORQUE IS NOT AS GOOD
AS THE TORQUE POWER.
Price Is Subject To Change - If Ordered Online We Will Contact You And Offer A Full Refund If :
"IF" We can't match the price listed on our online store due to the fluctuating AUD
"IF" We can not ship within 10 business days
SHIPPING OF COMPLETE STROKER OR TOP END KITS
"If Ordered Online" $55 Fixed Charge Available Australia Wide At Checkout
Actual item may differ from image shown