S363W03 DIY 363 C.I WINDSOR SHORT ENGINE KIT
Description
Click On The Fields Above And Custom Build Your D.Y.I Short Engine Kit To Suit Your Needs
Pavtek DIY Short Engine Kit Part # | S363W03 |
Engine Final Cubic Inches | 363 |
Stroke | 3.400" |
Final Bore Size | 4.125" |
Parts Included In DIY Short Engine Kit: | |
Block Included | Yes |
Block Brand | Dart SHP |
Block Part Number | DA-CC31364275 |
Crankshaft Included | Yes |
Crankshaft Brand | Scat |
Crankshaft Material | 4340 Steel |
Pistons Included | Yes |
Piston Brand | SRP - Forged |
Piston Style | Flat Top - With Inline Valve Reliefs |
Piston Valve Reliefs | Inline - Not To Suit Twisted Wedge Or Cleveland Style Heads |
Piston Dome Volume | -5cc ( 12.5 Dish Style Pistons Also Available - Call ) |
Gudgeon Pins Included | Yes |
Gudgeon Pin Brand | JE |
Gudgeon Pin Fit | Floating |
Rings Included | Yes - Moly - 1/16 1/16 3/16 |
Ring Brand | Speed Pro / Je / Hastings |
Conrods Supplied | Yes |
Conrod Brand | Scat |
Beam Style | H-Beam |
Rod Centre to Centre Length | 5.400" |
Conrod Bolts | 8740 |
Conrod Bolt Diameter | 7/16 |
Main Bearings Included | Yes - ACL Or Clevite Race Series |
Big End Bearings Included | Yes - ACL Or Clevite Race Series |
Cam Bearings Included | Yes - Dart Coated |
Welsh Plug Kit Included | Yes - Brass |
Harmonic Balancer | No - Can Be Supplied As An Optional Extra |
Flywheel or Flexplate | No - Can Be Supplied As An Optional Extra |
Machining Included In DYI Short Engine Kit: | |
Block Is Hot Tanked (Chemically Cleaned) | No - Block Is NEW |
Block Is Crack Tested | No - Block Is NEW |
Block Is Grouted | No - Not Required |
Block Is Main Tunnel Checked For Size | Yes |
Block Is Main Tunnel Line Honed | No |
Block Cam Tunnel Checked | No - Block Is NEW |
Block Is Clearanced for Stroker Kit | Not Required For This Package |
Block Is Bored & Honed | Yes |
Block Lifter Bores Are Honed & Grooved | No - Can Be Supplied As An Optional Extra |
Block Is Surface Decked | Yes - To Zero Deck Height +/- .003" |
Block Is Deburred After Decking | No - Can Be Supplied As An Optional Extra |
Conrod Small Ends Checked For Size | Yes |
Conrods Checked For Size | Yes |
Conrods Checked For Bend & Twist | Yes |
Conrods Are Fitted To Pistions | No - Can Be Supplied As An Optional Extra |
Balancing Included | Yes - External / Flexplate or Flywheel and Balancer Are Required |
Cam Bearings Fitted | Yes |
Welsh Plug Kit Fitted | No |
Block Final Washed For Final Assembly | No |
Final Oil Clearance Check Of Mains & Big Ends | No - Can Be Supplied As An Optional Extra |
Compression Ratio achieved with .041" thick compressed head gasket:
9.26:1 With 76cc Heads
9.66:1 With 72cc Heads
9.97:1 With 69cc Heads
10.18:1 With 67cc Heads
10.41:1 With 65cc Heads
10.67:1 With 63cc Heads
10.93:1 With 61cc Heads
11.19:1 With 59cc Heads
11.47:1 With 57cc Heads
Pavtek can custom assemble a D.I.Y short Engine kit with various combinations of Rods -Cranks & Pistons to suit your application
Call us for the best Price on D.I.Y short engine kits
Actual item may differ from image shown