434 ELIMINATOR - Cleveland Headed Engine 728 HP

 

 

 


CLASSIC LOOK SHOWN - STEALTH LOOK ALSO AVAILABLE
 
TORQUE: 611 ftlbs @ 5400 RPM ( 1050 Dominator carb & intake )
HORSEPOWER: 728 @ 6950 RPM ( Dominator carb & intake )
TORQUE: 604 ftlbs @ 5350 RPM ( 950 carb )
HORSEPOWER: 701 @ 6750 RPM ( 950 carb )
CAMSHAFT: Custom Pavtek Solid Roller
CYLINDER HEADS: "3v" Alloy heads
FUEL REQUIRED: Premium Unleaded 98 Octane
LONG MOTOR ASSEMBLED: L434C5/A
SHORT MOTOR KIT: S434C5
ASSEMBLED HEADS: H351C5/A
WANT IT NOW AND ARE LOOKING FOR A SUPER DEAL ON OUR ENGINE PACKAGES ?
CLICK HERE TO GO TO OUR IN STOCK LONG ENGINES

 

 

APPLICATION
If ground shaking power is what you want without the use or hassle of forced induction or  expensive exotic race fuels then this is "the" combo for you.  With a dominator carb & manifold this combination makes a whopping 610 ftlbs & an incredible
728 hp
at only 6950 RPM on pump fuel.  With the more humble looking 950cfm carb & manifold, this engine still makes an outstanding 604 ftlbs & 701 HP at only 6750 rpm.  We believe this is the best value for money combination on the market today. Our competitors are currently charging onwards of $10,000 more for less power. This engine is entirely new using an aftermarket heavy duty World or Dart block, alloy "3V" cylinder heads & a custom pavtek solid roller camshaft.

Others talk, We deliver....

 

 

 

PARTS INCLUDED:

Dart Engine Block - 9.200"DH   10deg Machined Valve locks
Steel Main Caps   Titanium Retainers
Brass Welsh Plug kit   H11 Dual with Dampner Springs
Alloy Cylinder heads   Valve Spring Locaters
New Intake Manifold- Dominator pattern optional Teflon Valve Stem Seals
Steel HP Harmonic Balancer   HD SS Inlet Valves
HV oil pan - Big Stroke Clearanced   HD SS Exhaust Valves
Oil pump pickup   Shaft Roller Rockers
Arp HD Oil pump Shaft   .080" 1 piece Race Pushrods
Main Stud Kit   Ford Motorsport Rocker Covers
Oil Pump   Intake Manifold Bolts
Steel 4340 Forged Crankshaft   Head Bolts
H-Beam Conrods   Performance Felpro rear main seal
Custom Forged Pistons   2" Custom Pavtek Ported Carby Spacer
Moly Rings   Full Gasket set
HD Cam Bearings   Cometic head gaskets
HP Main Bearings   Inlet Manifold Gaskets
HP Big End bearings   9 Key Rollmaster Timing chain set
Custom Solid Roller Camshaft   New Timing case cover
Crane Solid Roller Lifters   Engine is neutrally balanced
     

 

This engine utilizes a Windsor style block, but is the standard 9.200" Cleveland deck height.  This engine will drop straight into your engine bay just like your regular Cleveland engine block would!

Power figures were produced with off the shelf pacemaker 2" primary extractors.
Engine supplied with Ford Motorsport Rocker Covers.
Photo shown is with "optional" billet accessories.

Watch this package in Action
 

Now you can upgrade this package to EFI - Click here for more info